Skip to content

Whole-home energy monitor

Emporia Vue 3 Home Energy Monitor

A panel-mounted monitor that clips current sensors around your mains and up to 16 branch circuits, logging each one's real power and kilowatt-hours to an app.

We earn a commission if you buy through links on this page, at no extra cost to you. It does not change what we recommend — see our affiliate disclosure. As an Amazon Associate I earn from qualifying purchases.

Best for

Measuring hardwired and 240 V loads, or every circuit at once

Specifications

SensorsTwo 200 A main sensors + sixteen 50 A circuit sensors
ServiceSplit-phase 120/240 V residential panels
Data1-second readings, ±2% accuracy
Connectivity2.4 GHz Wi-Fi (Ethernet option); needs internet
SolarNet metering supported (not for solar tied in ahead of the panel)
ListingUL 61010, UL 2808
SubscriptionNone
Warranty1 year

Specifications as published by Emporia. Confirm against the current spec sheet before buying — manufacturers revise models without renaming them.

What's good

  • Measures what a plug-in meter can't — water heater, dryer, HVAC, EV charger, well pump
  • Every monitored circuit logged at once, so a stuck or cycling load shows up without guessing which to test
  • No subscription to see your own data

What's not

  • Installs inside the live panel — Emporia says installation should be done by a skilled person such as a licensed electrician
  • Sixteen circuit sensors cover most panels but not every breaker in a large one
  • Cloud-dependent: the app needs the monitor online

Our verdict

The answer when the question is a circuit rather than a plug. If your bill is high and the plug-in meter hasn't found the culprit, the cause is usually hardwired — a water heater, a heat pump's strip heat, a well pump short-cycling — and this is the tool that sees those. Budget for an electrician to install it unless you already work in panels.

Compare with the alternatives

See the full energy monitors roundup →