Skip to content

Electricians in Alaska: Licensed Electrical Contractors

Find licensed electricians in Alaska. We've gathered 11 electricians from across Alaska with their phone number, address, hours, and Google rating, so you can compare and reach out for quotes. Listings span Eagle River, Juneau, North Pole, Soldotna, Palmer and Anchorage and more, so there's likely an electrician near you. The electricians below average 4.8 stars on Google. A Alaska home averages 578 kWh a month, about 0.8 kW of continuous draw, so the big new loads (an EV charger, a heat pump, an induction range) are what push a panel past its limit, not everyday use; a load calculation tells you whether you need a service upgrade or just a few breaker spaces.

Before you hire in Alaska: size the job

Alaska at a glance

24.8¢
per kWh, residential

#6 most expensive of 51

$143.54
average monthly bill

EIA, 2024 annual avg

578 kWh
average monthly use

EIA, 2024 annual avg

0.8 kW
average continuous load

From 578 kWh/mo; a 200 A service delivers up to 48 kW

11 licensed electricians in Alaska

Spread across Alaska so there's likely one near you. Enter your ZIP above to sort nearest-first. Details from public Google Business Profiles: verify before hiring.

How to choose an electrician in Alaska

Verify the license and insurance

Electrical work in Alaska must be done or supervised by a licensed electrical contractor, and the license should be in the name of the company quoting you, not a friend of the crew. Look it up on the licensing board linked below, ask for proof of liability insurance, and confirm the contractor, not you, pulls the permit and schedules the inspection.

Start with a load calculation, not a panel size

For a panel upgrade, a new 240V circuit, or any electrification project, a good electrician runs the NEC Article 220 load calculation on your home before quoting. It decides whether you need a 200 A service upgrade (which involves the utility and the meter), a panel replacement at the same service size, a subpanel, or a load-management device that avoids the upgrade entirely. A quote that jumps straight to "200 amp upgrade" without the math is a guess.

Compare written quotes on the same scope

Get at least three quotes that name the panel brand and ampacity, the number of spaces, breaker types required by code (AFCI, GFCI), the wire gauge and run length for new circuits, whole-house surge protection, drywall repair, the permit and inspection fees, and the utility coordination. Ask what happens if the inspector flags existing issues, such as aluminum wiring or a missing ground, and whether those fixes are priced in.

What to know before hiring in Alaska

The largest utilities serving Alaska homes are Chugach Electric Assn (97,048 residential customers, 21.2¢/kWh), Matanuska Electric Assn (64,205 residential customers, 23.4¢/kWh) and Golden Valley Elec Assn (40,675 residential customers, 30.3¢/kWh). Your utility sets the rate your new circuits draw from, and it is also who an installer files interconnection or service paperwork with, so name it when you ask for quotes.

Check the license before you sign

Electrical contractors in Alaska are licensed by the Alaska Division of Corporations, Business and Professional Licensing (Electrical Administrators). Electrical contractors need a construction-contractor license plus a licensed Electrical Administrator; electricians hold Certificates of Fitness from the Department of Labor.

Look up a licenseBoard siteLinks checked 2026-10-19

Listing data is sourced from public Google Business Profiles and may be out of date. WattSimple is not affiliated with, and does not endorse or recommend, any listed company. Verify licensing and details directly before hiring.

Other energy pros in Alaska

Frequently asked questions

Verify the electrical contractor license on the Alaska licensing board, confirm liability insurance, and make sure the contractor pulls the permit and schedules the inspection. For a panel or service upgrade, insist on an NEC 220 load calculation before the quote. Get at least three written quotes on the same scope (panel size, circuits, breaker types, surge protection, patching) and compare what each one includes.

Plan the electrical work

All statesSigns your electrical panel is failingAll installer directories
Cite or link to this pageAPA · MLA · Chicago · HTML

Free to cite, quote and link. Copy a ready-made citation: the link back is all we ask.

APA

WattSimple. (2026, October 20). Electricians in Alaska: Licensed Electrical Contractors. https://wattsimple.com/electricians/alaska

MLA

"Electricians in Alaska: Licensed Electrical Contractors." WattSimple, 20 Oct. 2026, https://wattsimple.com/electricians/alaska.

Chicago

WattSimple. "Electricians in Alaska: Licensed Electrical Contractors." Last modified October 20, 2026. https://wattsimple.com/electricians/alaska.

HTML link

<a href="https://wattsimple.com/electricians/alaska">Electricians in Alaska: Licensed Electrical Contractors</a> (WattSimple)