How Many Amps Does a Grow Light Use?
Grow Light draws about 5 amps at 120 volts (600 watts running). At 5 A, a grow light fits comfortably on a standard 15 A or 20 A household circuit.
Amps = watts ÷ volts. Enter the wattage from your appliance's nameplate or label for an exact figure.
Current draw — a grow light
5 A
- At 120 V
- 600 W
- Typical breaker
- 15 A
Breaker figure is guidance for a simple resistive load, sized at 125% for continuous running — confirm against the nameplate and a licensed electrician.
Grow Light amperage at 120 V and 240 V
Same 600 W load — the current halves when the voltage doubles. Grow Light is typically a 120 V appliance in US homes.
| Draw | Watts | Amps at 120 V | Amps at 240 V |
|---|---|---|---|
| Running | 600 W | 5 A | 2.5 A |
Breaker and circuit for a grow light
At 5 A, a grow light fits comfortably on a standard 15 A or 20 A household circuit. For a dedicated circuit, guidance is a 15 A breaker with 14 AWG copper (75°C terminations) — sized at 125% of the running current because it runs 3+ hours at a time (NEC 210.20).
Guidance only — actual circuit sizing depends on your unit's nameplate, wire run length, and local code. Confirm with a licensed electrician. See the wire & breaker size chart for the full NEC ampacity table.
Frequently asked questions
Ask AI about this
Open an AI assistant with a question grounded in this page.