How Many Amps Does a Water Softener Use?
Water Softener draws about 0.6 amps at 120 volts (70 watts running). At 0.6 A, a water softener fits comfortably on a standard 15 A or 20 A household circuit.
Amps = watts ÷ volts. Enter the wattage from your appliance's nameplate or label for an exact figure.
Current draw — a water softener
0.6 A
- At 120 V
- 70 W
- Typical breaker
- 15 A
Breaker figure is guidance for a simple resistive load — confirm against the nameplate and a licensed electrician.
Water Softener amperage at 120 V and 240 V
Same 70 W load — the current halves when the voltage doubles. Water Softener is typically a 120 V appliance in US homes.
| Draw | Watts | Amps at 120 V | Amps at 240 V |
|---|---|---|---|
| Running | 70 W | 0.6 A | 0.3 A |
Breaker and circuit for a water softener
At 0.6 A, a water softener fits comfortably on a standard 15 A or 20 A household circuit. For a dedicated circuit, guidance is a 15 A breaker with 14 AWG copper (75°C terminations).
Guidance only — actual circuit sizing depends on your unit's nameplate, wire run length, and local code. Confirm with a licensed electrician. See the wire & breaker size chart for the full NEC ampacity table.
Frequently asked questions
Ask AI about this
Open an AI assistant with a question grounded in this page.