Skip to content

Heat Pump Installers in New Mexico: HVAC & Mini Split

Find heat pump and HVAC installers in New Mexico. We've gathered 10 installers from across New Mexico with their phone number, address, hours, and Google rating, so you can compare and reach out for quotes. Listings span Santa Fe, Clovis, Gallup, Roswell, Farmington and Belen and more, so there's likely a contractor near you. The installers below average 4.8 stars on Google. A typical heat pump uses about 4,000 kWh a year, which at 14.2¢/kWh in New Mexico comes to roughly $568 a year in electricity; a right-sized, well-installed system is what keeps it at the low end of that range.

Before you get quotes in New Mexico: size and price the system

Heat pump sizing calculatorBTU and tonnage for your home and climateHeat pump cost calculatorInstalled price by system type and sizeMini split sizingBTU per zone for ductless systems

New Mexico at a glance

14.2¢
per kWh, residential

#31 most expensive of 51

$92.88
average monthly bill

EIA, 2024 annual avg

654 kWh
average monthly use

EIA, 2024 annual avg

$568.00
a year to run a heat pump

4,000 kWh/yr (typical) at 14.2¢/kWh

10 heat pump and HVAC installers in New Mexico

Spread across New Mexico so there's likely one near you. Enter your ZIP above to sort nearest-first. Details from public Google Business Profiles: verify before hiring.

How to choose a heat pump installer in New Mexico

Licensed HVAC contractor, EPA 608 certified

Anyone who opens a refrigerant line must hold EPA Section 608 certification (federal), and New Mexico may license HVAC contractors on top of that. The outdoor unit and any backup heat strips need their own 240V circuits, which is licensed electrical work: ask who does it, who pulls the electrical permit, and confirm liability insurance plus a workmanship warranty, not just the manufacturer's parts warranty.

Insist on a Manual J load calculation

An oversized heat pump short-cycles, dehumidifies poorly, and wears out early; an undersized one leans on expensive backup heat. A good installer runs an ACCA Manual J load calculation on your actual house (insulation, windows, orientation, air leakage) and a Manual S selection that checks the unit's real capacity at your design temperature, not its nominal tonnage. If a quote is based on square footage alone, get another quote.

Compare quotes on ratings, cold-weather capacity, and scope

Line up quotes on the same SEER2 and HSPF2 ratings, the same ducted or ductless design, and the same zoning. In a cold climate ask for the rated heating capacity at 5°F and whether the system is a cold-climate model. Make sure each quote spells out duct modifications, line-set length, the electrical circuit, the thermostat, backup heat, the permit and inspection, and the commissioning (refrigerant charge and airflow verified, not just a thermostat test).

What to know before hiring in New Mexico

The largest utilities serving New Mexico homes are Public Service Co of NM (492,945 residential customers, 15.6¢/kWh), Southwestern Public Service (100,540 residential customers, 12.0¢/kWh) and El Paso Electric (94,760 residential customers, 10.2¢/kWh). Your utility sets the rate your heat pump runs on, and it is also who an installer files interconnection or service paperwork with, so name it when you ask for quotes.

Check the license before you sign

The outdoor unit and any backup heat strips need new 240V circuits, which is licensed electrical work. Electrical contractors in New Mexico are licensed by the New Mexico Regulation and Licensing Department, Construction Industries Division. Electrical contractor licenses (EE-98) and journeyman certificates (EE-98J).

Look up a licenseBoard siteLinks checked 2026-10-19

Listing data is sourced from public Google Business Profiles and may be out of date. WattSimple is not affiliated with, and does not endorse or recommend, any listed company. Verify licensing and details directly before hiring.

Other energy pros in New Mexico

EV Charger Installers in New MexicoPhone, address, hours, and ratings.Solar Installers in New MexicoPhone, address, hours, and ratings.Generator Installers in New MexicoPhone, address, hours, and ratings.Electricians in New MexicoPhone, address, hours, and ratings.Insulation Contractors in New MexicoPhone, address, hours, and ratings.

Frequently asked questions

Use a licensed HVAC contractor with EPA 608 certification, confirm they pull the mechanical and electrical permits New Mexico requires and schedule the inspection, and insist on an ACCA Manual J load calculation before any quote. Get at least three written quotes on the same system type and ratings (SEER2, HSPF2, and capacity at 5°F for cold climates), and check that commissioning, the electrical circuit, and a workmanship warranty are included.

Plan your heat pump project

Heat pump sizing calculator

BTU and tonnage from your home and climate.

Heat pump cost calculator

Installed price by system type and size.

Heat pump cost in New Mexico

Install ranges and running cost at New Mexico's rate.

New Mexico electricity rates

What you pay per kWh today in New Mexico.

Heat pump installation cost

What drives the installed price.

How to choose a heat pump

Ducted vs. ductless, ratings, cold-climate models.

All statesDo I need a panel upgrade for a heat pump?All installer directories
Cite or link to this pageAPA · MLA · Chicago · HTML

Free to cite, quote and link. Copy a ready-made citation: the link back is all we ask.

APA

WattSimple. (2026, October 19). Heat Pump Installers in New Mexico: HVAC & Mini Split. https://wattsimple.com/heat-pump-installers/new-mexico

MLA

"Heat Pump Installers in New Mexico: HVAC & Mini Split." WattSimple, 19 Oct. 2026, https://wattsimple.com/heat-pump-installers/new-mexico.

Chicago

WattSimple. "Heat Pump Installers in New Mexico: HVAC & Mini Split." Last modified October 19, 2026. https://wattsimple.com/heat-pump-installers/new-mexico.

HTML link

<a href="https://wattsimple.com/heat-pump-installers/new-mexico">Heat Pump Installers in New Mexico: HVAC &amp; Mini Split</a> (WattSimple)