Skip to content

Heat Pump Installers in Texas: HVAC & Mini Split

Find heat pump and HVAC installers in Texas. We've gathered 9 installers from across Texas with their phone number, address, hours, and Google rating, so you can compare and reach out for quotes. Listings span Houston, Denton, Austin, Arlington and Dallas, so there's likely a contractor near you. The installers below average 4.9 stars on Google. A typical heat pump uses about 4,000 kWh a year, which at 14.9¢/kWh in Texas comes to roughly $598 a year in electricity; a right-sized, well-installed system is what keeps it at the low end of that range.

Before you get quotes in Texas: size and price the system

Heat pump sizing calculatorBTU and tonnage for your home and climateHeat pump cost calculatorInstalled price by system type and sizeMini split sizingBTU per zone for ductless systems

Texas at a glance

14.9¢
per kWh, residential

#24 most expensive of 51

$163.72
average monthly bill

EIA, 2024 annual avg

1,096 kWh
average monthly use

EIA, 2024 annual avg

$597.60
a year to run a heat pump

4,000 kWh/yr (typical) at 14.9¢/kWh

9 heat pump and HVAC installers in Texas

Spread across Texas so there's likely one near you. Enter your ZIP above to sort nearest-first. Details from public Google Business Profiles: verify before hiring.

How to choose a heat pump installer in Texas

Licensed HVAC contractor, EPA 608 certified

Anyone who opens a refrigerant line must hold EPA Section 608 certification (federal), and Texas may license HVAC contractors on top of that. The outdoor unit and any backup heat strips need their own 240V circuits, which is licensed electrical work: ask who does it, who pulls the electrical permit, and confirm liability insurance plus a workmanship warranty, not just the manufacturer's parts warranty.

Insist on a Manual J load calculation

An oversized heat pump short-cycles, dehumidifies poorly, and wears out early; an undersized one leans on expensive backup heat. A good installer runs an ACCA Manual J load calculation on your actual house (insulation, windows, orientation, air leakage) and a Manual S selection that checks the unit's real capacity at your design temperature, not its nominal tonnage. If a quote is based on square footage alone, get another quote.

Compare quotes on ratings, cold-weather capacity, and scope

Line up quotes on the same SEER2 and HSPF2 ratings, the same ducted or ductless design, and the same zoning. In a cold climate ask for the rated heating capacity at 5°F and whether the system is a cold-climate model. Make sure each quote spells out duct modifications, line-set length, the electrical circuit, the thermostat, backup heat, the permit and inspection, and the commissioning (refrigerant charge and airflow verified, not just a thermostat test).

What to know before hiring in Texas

The largest utilities serving Texas homes are City of San Antonio (865,914 residential customers, 12.4¢/kWh), Austin Energy (507,291 residential customers, 12.6¢/kWh) and Entergy Texas (457,369 residential customers, 13.7¢/kWh). Your utility sets the rate your heat pump runs on, and it is also who an installer files interconnection or service paperwork with, so name it when you ask for quotes.

Check the license before you sign

The outdoor unit and any backup heat strips need new 240V circuits, which is licensed electrical work. Electrical contractors in Texas are licensed by the Texas Department of Licensing and Regulation. Electrical Contractor business license; Apprentice, Journeyman, Master Electrician and Residential Wireman individual licenses.

Look up a licenseBoard siteLinks checked 2026-10-19

Listing data is sourced from public Google Business Profiles and may be out of date. WattSimple is not affiliated with, and does not endorse or recommend, any listed company. Verify licensing and details directly before hiring.

Other energy pros in Texas

EV Charger Installers in TexasPhone, address, hours, and ratings.Solar Installers in TexasPhone, address, hours, and ratings.Generator Installers in TexasPhone, address, hours, and ratings.Electricians in TexasPhone, address, hours, and ratings.Insulation Contractors in TexasPhone, address, hours, and ratings.

Frequently asked questions

Use a licensed HVAC contractor with EPA 608 certification, confirm they pull the mechanical and electrical permits Texas requires and schedule the inspection, and insist on an ACCA Manual J load calculation before any quote. Get at least three written quotes on the same system type and ratings (SEER2, HSPF2, and capacity at 5°F for cold climates), and check that commissioning, the electrical circuit, and a workmanship warranty are included.

Plan your heat pump project

Heat pump sizing calculator

BTU and tonnage from your home and climate.

Heat pump cost calculator

Installed price by system type and size.

Heat pump cost in Texas

Install ranges and running cost at Texas's rate.

Texas electricity rates

What you pay per kWh today in Texas.

Heat pump installation cost

What drives the installed price.

How to choose a heat pump

Ducted vs. ductless, ratings, cold-climate models.

All statesDo I need a panel upgrade for a heat pump?All installer directories
Cite or link to this pageAPA · MLA · Chicago · HTML

Free to cite, quote and link. Copy a ready-made citation: the link back is all we ask.

APA

WattSimple. (2026, October 19). Heat Pump Installers in Texas: HVAC & Mini Split. https://wattsimple.com/heat-pump-installers/texas

MLA

"Heat Pump Installers in Texas: HVAC & Mini Split." WattSimple, 19 Oct. 2026, https://wattsimple.com/heat-pump-installers/texas.

Chicago

WattSimple. "Heat Pump Installers in Texas: HVAC & Mini Split." Last modified October 19, 2026. https://wattsimple.com/heat-pump-installers/texas.

HTML link

<a href="https://wattsimple.com/heat-pump-installers/texas">Heat Pump Installers in Texas: HVAC &amp; Mini Split</a> (WattSimple)