How Many Amps Does an Electric Wall Heater Use?

Electric Wall Heater amperage at 120 V and 240 V

Same 1,500 W load: the current halves when the voltage doubles. Electric Wall Heater is typically a 240 V appliance in US homes.

Breaker and circuit for an electric wall heater

Electric Wall Heater runs on its own dedicated 240 V circuit: a 1,500 W load calls for at least a 15 A double-pole breaker (your unit's nameplate may require more). For a dedicated circuit, guidance is a 15 A breaker with 14 AWG copper (75°C terminations), sized at 125% of the running current because it runs 3+ hours at a time (NEC 210.20).

Guidance only: actual circuit sizing depends on your unit's nameplate, wire run length, and local code. Confirm with a licensed electrician. See the wire & breaker size chart for the full NEC ampacity table.

Measure what an electric wall heater actually draws

The figures above are typical ratings, and this load is usually hardwired or on a 240 V circuit, so a plug-in meter can't reach it. A clamp meter reads the current on one conductor at the disconnect or panel without breaking the circuit; opening a panel is work for someone qualified, and the voltage pen confirms a circuit is dead first.

We earn a commission if you buy through links on this page, at no extra cost to you. It does not change what we recommend. See our affiliate disclosure. As an Amazon Associate I earn from qualifying purchases.

Clamp meter

Fluke 323

Best for: Measuring what a hardwired circuit actually draws, even in a crowded panel

Check price on Amazon: Fluke 323 (opens in a new tab)(paid link)

Non-contact voltage tester

Klein Tools NCVT-3P

Best for: Confirming a circuit is dead before you open a device or box

Check price on Amazon: Klein Tools NCVT-3P (opens in a new tab)(paid link)

Frequently asked questions

Amp draw of other appliances

• Space Heater13 A
• Window Air Conditioner10 A
• Central Air Conditioner15 A
• Heat Pump13 A